他社との光ケーブルで接続できたかは、まず光の送信と受信ができているかを確認する。
Speedの設定が違っていても、光の確認はできます。
(TXとRXが違っていたら光の確認はできないです。)
最終的に接続が問題ないかは、パケットの送信数、受信数があるかで確認する
pingの接続確認は念のための確認くらいです。
TxまたはRxのいずれかの電力が-30dBm以下の範囲にある場合は、実際の信号が送受信されていないことを意味します。
一般的には、RX側「Optical Receive Power (dBm) 」で、光が届いているかを確認する。
dBm (デシベル) | μW (マイクロワット) | mW (ミリワット) | 説明 |
---|---|---|---|
Cisco Arista | |||
-30 | 1 | 0.001 | 信号の損失 |
-20 | 10 | 0.01 | |
-16 | 25.1 | 0.0251 | 2Gbpsの最小受付信号 |
-15 | 31.6 | 0.0316 | 4Gbpsの最小受付信号 |
-13.01 | 50 | 0.05 | |
-10 | 100 | 0.1 | 2Gbpsの最小送信信号 |
-9 | 125.9 | 0.1259 | 4Gbpsの最小受付信号 |
-8.24 | 150 | 0.15 | |
-6.99 | 200 | 0.2 | 通常の光信号強度範囲 |
-6.02 | 250 | 0.25 | |
-5.23 | 300 | 0.3 |
受信機電力範囲 | ||
---|---|---|
Txパワー | 送信電力信号 | -3~ -9.5dBm |
Rxパワー | 受信電力信号 | 0~-17dBm |
2Gbpsの最大許容信号減衰:-18.2dBm
4Gbpsの最大許容信号減衰:-15.4dBm
8Gbpsの最大許容信号減衰:-13.8dBm
# show interface transceiver details |
Switch # show interfaces gigabitethernet1/0/3 transceiver detail ITU Channel not available (Wavelength not available), Transceiver is externally calibrated. mA:milliamperes, dBm:decibels (milliwatts), N /A :not applicable. ++:high alarm, +:high warning, -:low warning, -- :low alarm. A2D readouts ( if they differ), are reported in parentheses. The threshold values are uncalibrated. High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) ------- ------------------ ---------- --------- --------- --------- Gi1 /0/3 41.5 110.0 103.0 -8.0 -12.0 High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) ------- --------------- ---------- --------- --------- --------- Gi1 /0/3 3.20 4.00 3.70 3.00 2.95 High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold Threshold Port (milliamperes) (mA) (mA) (mA) (mA) ------- ----------------- ---------- --------- --------- --------- Gi1 /0/3 31.0 84.0 70.0 4.0 2.0 Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ------- ----------------- ---------- --------- --------- --------- Gi1 /0/3 -0.0 ( -0.0) -0.0 -0.0 -0.0 -0.0 Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ------- ----------------- ---------- --------- --------- --------- Gi1 /0/3 N /A ( -0.0) -- -0.0 -0.0 -0.0 -0.0 |
show interfaces diagnostics optics ge-0/0/10
Tx Power(dBm)とRx Power(dBm)を確認する
> show interface transceiver <- all interfaces list
> show interfaces ethernet10 transceiver detail <- Eth10
> sfpshow ポート番号 > sfpshow 13 |
一般向けサイト
ITエンジニア向けサイト
英語サイト
Portfolio
Copyright (c) 2025 現場で必要なネットワーク技術入門 All Rights Reserved.